Category: Band Saw Blades

For cutting moderate to difficult machining materials, such as:

• Stainless steels
• Carbon steels
• Hardened materials
• Solid rods

Blade tooth designs available:

• Broach
• Posi
• Hook

Aggressive 12°face angle for use in heavy wall and larger cross section solid materials which have work hardening or abrasive characteristics such as:

• Exotic Metals
• Super Alloys
• Space-age materials

Blade tooth designs available:

• Posi

For straight or contour cutting when a narrow band is required, such as:

• Internal cuts
• Die work

Blade tooth designs available:

• Broach
• Constant
• Hook

Modified tooth profile and set configuration resists strippage and provides a better finish. For making straight and miter cuts in stacked and bundled structurals or tubing such as:

• I-beams
• H-beams
• Tubing

Blade tooth designs available:

• Posi

Wider kerf created by the heavier set aids in cutting of materials that tend to bind in the cut, such as:

• Heavy-wall beams
• Flanged beams
• Stacked or bundled structural

Blade tooth designs available:

• Broach
• Posi

For general purpose cutting in mild steel, pipe, structurals, or solids. Use in maintenance and tool room applications.

• Mild steels
• Thin-wall tubing
• Sheet metals

Blade tooth designs available:

• Broach
• Constant
• Hook
• Posi

For cutting tubing and structural materials, including troublesome interrupted cuts. Excellent for maintenance departments cutting materials such as:

• Thin wall tubing
• Sheet metal
• Light structural

Blade tooth designs available:

• Broach

Light duty production blade. Use where additional beam strength is beneficial. Not recommended for band speeds in excess of 4,000 surface feet per minute. For use in applications such as:

• Tool room cutting
• Mild steel

Blade tooth designs available:

• Broach
• Constant
• Hook
• Posi

Light duty blade for easy to machine materials such as:

• Wood
• Aluminum
• Brass and other soft materials
• Wet and dry ice

Tooth Designs Available:

• Hook
• Skip
• Constant

For cutting thin or odd shaped by means of frictional heat. Materials such as:

• Sheet Metal
• Light Plate
• Light plate metals
• Thin-wall aircraft tubing and structurals
• Gates and Risers (Castings)

Blade tooth designs available:

• Constant

Heavy gauge for additional beam strength cutting materials such as:

• Woodworking
• Cabinetry
• Furniture Manufacturing

Blade tooth designs available:

• Hook

For straight and easy contour cuts in materials, such as:

• Wood
• Flakeboard
• Plastic
• Non-ferrous materials

Blade tooth designs available:

• Hook

For milling and resawing expensive, exotic, and abrasive species of hardwoods.

Blade tooth designs available:

• Triple Chip

Good for both hard and soft woods, production cutting, resawing, and milling.

Tooth Designs Available:

• Hook

A “Sharp out of the box” profile grind for band mill and resaw applications.

Blade tooth designs available:

• Hook

For use in dismantling pallets.

Available options:

• Pallet Reclaim C, flex back carbon steel
• Pallet Slayer™
• Safety Tip Pallet Reclaim Reciprocating Blade

For cutting composites and hard friable materials, such as:

• Quartz
• Glass
• Ceramic
• Stone
• Carbon Graphite

Edge designs available:

• Continuous Edge
• Segmented Edge
• 4P Gulleted Edge

For cutting soft and fibrous materials, such as:

• Foam
• Soft plastics
• Rubber
• Leather
• Filter mateiral
• Insulation materials insulation

Available in various edge configurations.

For cutting difficult to machine materials, such as:

• Inconel
• Hastelloy
• Titanium
• High Nickel Alloys
• Tool and Specialty Steels

Blade tooth designs available:

• Triple Chip
• Triple Set
• Negative Rake