Reciprocating Saw Blades

Home → Products → Reciprocating Saw Blades

DESCRIPTION

The Bi-Metal Universal 1/2″ Reciprocating Saw Blades are shatterproof, fit all popular machines, and outperform standard blades by a wide margin.

For extra long life in stainless steel, fiberglass, or other tough or abrasive applications, use Slik-Kote blades.

KEY FEATURES

Hard teeth stay sharper longer
Bi-metal construction eliminates breakage
40+ blades to match your applications

APPLICATIONS

Universal metal cutting
Fire and rescue
Demolition work
Pipe cutting
Fiberglass
Metal
Metal scroll
Nail-embedded wood
Paneling
Plaster
Wood

SAW BLADE DESIGNS

Ruff Neck Demolition Blades
Pipe Cutting
Metal Cutting
Metal Scroll Cutting
Wood & Plaster Cutting

Wood & Plaster

Wood & Plaster
Item No. – Qty	Length	Width	Thkns.	T.P.I.	Recommended Uses
45004-5	6″	TAPER	.050	4	Fast cutting, positive rake design with wide gullet spacing for roughing-in.
45004-50	6″	TAPER	.050	4
45606-5	6″	3/4″	.035	6	For wood and nail-embedded woods, all composition material. Also nonferrous metals.
45606-50	6″	3/4″	.035	6
45006-5	6″	TAPER	.050	6	General roughing-in work in wood and nail-embedded woods. Fast cutting.
45006-50	6″	TAPER	.050	6
45906-5	9″	TAPER	.050	6
45906-50	9″	TAPER	.050	6
45106-5	12″	TAPER	.050	6
45106-50	12″	TAPER	.050	6
45110-5	12″	TAPER	.050	10	For thinner sections of wood, plastics, metals 1/8” and under, where extra blade length is required.
45110-50	12″	TAPER	.050	10
52056-5	5″	3/4″	.035	6 V-TTH	PLASTER CUTTING – For smooth, fast cuts in plaster, plasterboard and metal lath plaster.
52056-50	5″	3/4″	.035	6 V-TTH

Metal Scroll

Metal Scroll
Item No. – Qty	Length	Width	Thkns.	T.P.I.	Recommended Uses
43114-5	3-5/8″	5/16″	.035	14	For scroll cutting heavy gauge metal, fiberglass, masonite.
43114-50	3-5/8″	5/16″	.035	14	For scroll cutting heavy gauge metal, fiberglass, masonite.
42018-5	3″	1/4″	.035	18	For scroll cutting metals lighter than 14 gauge.
42018-50	3″	1/4″	.035	18	For scroll cutting metals lighter than 14 gauge.

Metal Cutting

Metal Cutting
Item No. – Qty	Length	Width	Thkns.	T.P.I.	Recommended Uses
40610-5	6″	3/4″	.035	10	For metal decking, roofing, and nonferrous metals.
40610-50	6″	3/4″	.035	10
40810-5	8″	3/4″	.035	10
40810-50	8″	3/4″	.035	10
40010-5	6″	3/4″	.050	10	For cutting soild pipe, heavy gauge metal and nail embedded wood.
40010-50	6″	3/4″	.050	10
40640-5	6″	3/4″	.035	14/10	Heavy gauge metals, compositions, masonite, wood, etc.
40640-50	6″	3/4″	.035	14/10
40840-5	8″	3/4″	.035	14/10
40840-50	8″	3/4″	.035	14/10
40120-5	12″	3/4″	.035	14/10
40120-50	12″	3/4″	.035	14/10
40040-5	6″	3/4″	.050	14/10	For cutting soil pipe and heavy gauge metal.
40040-50	6″	3/4″	.050	14/10
40080-5	8″	3/4″	.050	14/10
40080-50	8″	3/4″	.050	14/10
40414-5	4″	3/4″	.035	14	For metals heavier than 1/8″, bar stock, angles, etc. Also rubber, masonite, fiberglass, etc.
40414-50	4″	3/4″	.035	14
40614-5	6″	3/4″	.035	14
40614-50	6″	3/4″	.035	14
40814-5	8″	3/4″	.035	14
40814-50	8″	3/4″	.035	14
40014-5	6″	3/4″	.050	14	For cutting soil pipe and heavy gauge metal.
40414-50	6″	3/4″	.050	14	For cutting soil pipe and heavy gauge metal.
40418-5	4″	3/4″	.035	18	For heavy gauge sheet metal, conduit, pipe, tubing, thin fiberglass, etc.
40418-50	4″	3/4″	.035	18
40618-5	6″	3/4″	.035	18
40618-50	6″	3/4″	.035	18
40818-5	8″	3/4″	.035	18
40818-50	8″	3/4″	.035	18
40018-5	6″	3/4″	.050	18	For conduit, angle iron and heavy gauge metal up to 1/4″.
40018-50	6″	3/4″	.050	18	For conduit, angle iron and heavy gauge metal up to 1/4″.
39684-5	6″	3/4″	.035	18/14	Graduated teeth for fast cuts in metals heavier than 3/32”, bar stock, angles, pipe. Also fiberglass, fiber, “Transite”.
39684-50	6″	3/4″	.035	18/14
40424-5	4″	3/4″	.035	24	For metals lighter than 18-gauge thin wall tubing, formed sheet, trim, etc.
40424-50	4″	3/4″	.035	24
40624-5	6″	3/4″	.035	24
40624-50	6″	3/4″	.035	24
40432-5	4″	3/4″	.035	32	For very thin gauge metals, sheet, tubing, trim, etc.
40432-50	4″	3/4″	.035	32	For very thin gauge metals, sheet, tubing, trim, etc.

Ruff Neck Demolition Blades

Ruff-Neck™
Item No. – Qty	Length	Width	Thkns.	T.P.I.	Recommended Uses
46685-2	6″	1″	.062	8/5	For demolition work, remodeling, wood, wallboard, paneling, plaster, nail-embedded wood.
46685-50	6″	1″	.062	8/5
46985-2	9″	1″	.062	8/5
46985-50	9″	1″	.062	8/5
46185-2	12″	1″	.062	8/5
46185-50	12″	1″	.062	8/5
46190-2	12″	1″	.062	3	Fastest cutting, roughing-in work in wood.
46190-50	12″	1″	.062	3	Fastest cutting, roughing-in work in wood.
46706-2	6″	1″	.062	12/8	Wavy set for nail-embedded wood, metal lath, thin steel plate and metal demolition work.
46706-50	6″	1″	.062	12/8
46906-2	9″	1″	.062	12/8
46906-50	9″	1″	.062	12/8

Reciprocating Saw Blades

Made in USA with global materials